This is the set up we had put together for our Photo Shoot. We are using two 500w Lights, along with a control panel to adjust the brightness and contrast. The lights were used to add some clarity to the shot, as the images with grainy and noisy without the use of lighting.
Here is the lighting when it's been switched on, as you can see it is extremely bright. Unfortunately one of the lights was slightly more yellow as opposed to the white light on the foreground. However it did not affect the majority of our shots. At this point we begun thinking these lights may not be strong enough.
So we attempted to use the Camera flash alongside these lights. Here is what happened, unfortunately it had become too bright and it is difficult to see what the image is of.
After some experimenting, we had come up with the best lighting configuration, we turned the lights to approximately 3/4 of the available strength, and didn't use the camera flash.
This is the set up we had put together for our Photo Shoot. We are using two 500w Lights, along with a control panel to adjust the brightness and contrast. The lights were used to add some clarity to the shot, as the images with grainy and noisy without the use of lighting.
No comments:
Post a Comment